Cleasby Fiberglass ConveyorsCleasby FBR Series insulated fiberglass roofing conveyors are designed to greatly reduce the risk of accidental electrocution in the event the conveyor touches a power line. |
Click to Enlarge |
|
The fact that the FBR conveyor is partially produced and assembled from components of fiberglass and other traditional electrical non-conductive materials MUST NOT BE ASSUMED AS A SAFE-GUARD against an inadvertent contact with a power line. You must exercise the utmost care. There are many factors that influence the electrical conductivity of a structure such as the FBR conveyor. In addition, IT IS AGAINST FEDERAL AND STATE LAW TO POSITION THE CONVEYOR WITHIN TEN (10') FEET OF A POWER LINE. ALWAYS USE EXTREME CAUTION WHEN OPERATING THE CONVEYOR. |
Patent #5,984,077
FBR Conveyor Benefits
- 1. All Fiberglass Frame:
- This greatly reduces the risk of accidental electrocutions.
- 2. Lighter in Weight:
- This reduces the stress and pressure on the turntable which in turn gives longer life to the equipment.
- 3. Structurally Strong And Durable:
- This conveyor is more flexible and forgiving than metal conveyors. It will "spring back" upon impact in most cases rather than bend or dent.
- 4. No Welding Required For Assembly or Repair:
- This conveyor is assembled using different types of fasteners which make repairs easier and less expensive.
- 5. No Rust or Metal Fatigue:
- Fiberglass doesn't rust. This greatly reduces the cost and time involved to repair metal fatigue or rust.
FBR Conveyor Features
- Stop and start control at top of conveyor.
- 16" wide belt with 4" high replaceable cleats.
- Special belt tracking guide.
- Standard conveyor lengths: 26', 31', 36', 38', 40', 41'.
Conveyor Weights: (Approximate)
| FBR-6-26 | 840 Lbs. | FBR-6-38 | 1125 Lbs | |
| FBR-6-31 | 1000 Lbs. | FBR-6-40 | 1300 Lbs. | |
| FBR-6-36 | 1160 Lbs. | FBR-6-41 | 1325 Lbs. |
Back to top